Countersunk - Rivet Countersunk 4.0x15mm x Q:50
Code:5H95
Barcode:6002919135815

• Used to fasten pieces of material together

• Requires a countersunk hole prior to installation

• Also known as “Flat” rivet

• When a flush finish (smooth finish) is required

• Ideal for installing door handles to steel/aluminium doors

• Moderate corrosion protection. For interior use only

• Aluminium & Zinc

 

Install with a rivet gun.

A pilot hole is required; refer to the packet label to confirm the size.

Use the correct nozzle size for the correct rivet thickness.

Pump the rivet gun until the mandrel of the rivet breaks off.

This indicates that the rivet has been successfully installed.
Cobalt Drill
4AA30
Stubby Drillbit
4AM10
Rivet Washer
5M30
Stubby Bit
5N30
Self Tapper
3F40
Rivet Peeled
5A35
Rivet Closed
5C20
×
<
>